NEW
MATERIAL
Every grade we supply,
on one set of paper.
Electronic chemicals, industrial solvents, polyurethane systems, oilfield and water-treatment chemistry, crop-protection technicals and functional ingredients — sourced from named Chinese producers into Southeast Asia. Producer specification or lot COA behind every figure. CIF your port.
Three kinds of supply line. Each one says exactly what it is.
NMP and GBL from one state-owned Shandong producer
Origin stated, capacity stated, COA per batch in the manufacturer’s name, specification sheets with file number and effective date. The only two products in this book that carry an origin story.
Everything else from a named producer
Solvents, intermediates, HF, PU systems, oilfield chemistry, technicals and ingredients. The producer is named on the SDS and COA you receive; where this deck prints no purity figure, it is because we quote the lot, not a brochure.
POME demulsifier
FZ has its own capital in the plant that makes it. We say “stake”, not “manufacturer” — skin in the game is the claim, and it cannot be faked.
Numbers. Every figure is a producer’s published specification or a named lot’s COA. Typical values are for selection only, never a sales specification.
Terms. CIF Port Klang, Pasir Gudang or Penang; other SEA ports on request. No Malaysian stock is held — consignment terms follow once a lot has landed.
Self-claims. A producer’s own claim about itself is marked †. Public-record facts are not.
Beyond the book. Grades and products outside this catalogue are matched on request — ask the desk with a specification, not a product name.
Six families. One desk, one document standard.
N-Methyl-2-pyrrolidone · four grades, one factory.
CAS 872-50-4 · HS 2933.79 · factory-direct from a state-owned electronic-materials producer in Shandong (named on quotation). Shelf life 12 months. Specifications below are the producer’s published sheets; lot figures are from COAs on file.
| Grade | Purity (GC) | Moisture | Amines | Metals, per element | Particles | Anions | Packing | Source |
|---|---|---|---|---|---|---|---|---|
| G4 · IC-general电子级 | ≥ 99.90 wt% typical lots 99.94 | ≤ 100 ppm | free ≤ 1.0 ppm total ≤ 10 ppm | ≤ 0.10 ppb (35 elements) Si ≤ 1.0 ppb | >0.1 µm ≤ 100 · >0.2 µm ≤ 50 · >0.5 µm ≤ 10 EA/mL | chloride · nitrate · phosphate · sulfate ≤ 20 ppb each | 0.5 L · gallon · 20 L · 200 L · ISO tank | Spec PS-01-04 rev 1.0 · eff. 2026-01-11 |
| G3电子级 | ≥ 99.80 wt% | ≤ 200 ppm | total ≤ 10 ppm | ≤ 1.00 ppb (25 elements) | >0.5 µm ≤ 50 EA/mL | ≤ 100 ppb each | gallon · 20 L · 200 L · IBC · ISO tank | Spec PS-01-02 rev 1.0 · eff. 2026-01-11 |
| Battery grade电池级 | ≥ 99.80 wt% lot 99.94 | ≤ 200 ppm lot 84 ppm | total ≤ 20 ppm | ≤ 20 ppb (32 elements) lot max: Na 1.31 · Fe 0.71 · Ti 0.36 | — | — | ISO tank 20 t | COA lot F0226061804A · 2026-06-18 |
| G2 · industrial工业级 | ≥ 99.80 wt% lots 99.94 | ≤ 200 ppm lots 68–71 ppm | total ≤ 20 ppm | ≤ 10 ppb (32 elements, tank lots) lot max: Na 0.69 · Ti 0.33 | — | — | 200 L drum 16 t · ISO tank 20 t | COAs F0226042202A · F0226060908C |
How we quote metals
By grade specification or by a named lot’s actual maximum — never a blanket “<0.1 ppb”. Battery and industrial lots can carry Na, Fe or Ti above 0.10 ppb while sitting well inside their own spec; the COA shows it line by line.
Documents on file
- SGS 2026: halogen not detected · RoHS pass
- REACH SVHC statement 2026
- Specification sheets PS-01-02 / PS-01-04 · COA per batch
Uses & notes
Battery electrode slurry, CNT dispersion, resist stripping and cleaning, polymer and insulation synthesis. China → ASEAN duty-free under ACFTA with Form E. EU buyers: REACH Annex XVII entry 71 applies to NMP.
GBL from the same factory, and two amine intermediates.
γ-Butyrolactone · GBLγ-丁内酯 · CAS 96-48-0
Battery electrolyte and NMP feedstock, resist stripping and dilution, polymer synthesis. Producer specification as published; COA per batch.
Not offered into Singapore — GBL is a controlled substance under the Misuse of Drugs Act there. NMP-only for Singapore buyers.
Cyclohexylamine · CHA环己胺 · CAS 108-91-8
Rubber accelerators, corrosion inhibitors, boiler-water treatment, sweetener and pharma intermediates.
Dicyclohexylamine · DCHA二环己胺 · CAS 101-83-7
Vulcanisation accelerators, extraction agents, corrosion inhibitors, agrochemical and dye intermediates.
Behind every NMP and GBL COA: 1,200 m² of N2 / N4 / N6 clean laboratories and 100+ instruments (ICP-MS/MS, ICP-OES, GC-MS, LC, ion chromatography, particle counting) at the producer, IATF 16949 and ISO 9001 certified. CHA and DCHA are direct supply — COA per batch, no origin story.
Electronic-grade HF · five grades, etch bath to reagent.
Network partner · Chlor-alkali producer · ShandongCAS 7664-39-3 · 49.0 % concentration, adjustable to customer specification · wafer etch and clean, display and PV wet processes. Grade ladder and limits as published in the producer’s HF grade catalogue.
| Grade | Concentration | Colour (Hazen) | 38 metal ions | Chloride · phosphate · nitrate · sulfate | Fluosilicic acid | Particles | Packing |
|---|---|---|---|---|---|---|---|
| G5 / UPSSS | 49.0 ± 0.2 % | ≤ 5 | ≤ 0.01 µg/kg | ≤ 10 µg/kg each | ≤ 10 µg/kg | 0.2 µm ≤ 20 · 0.3 µm ≤ 15 · 0.5 µm ≤ 3 pcs/mL | tank truck · 200 L · 4 L · 500 mL |
| G4 / UPSS | 49.0 ± 0.2 % | ≤ 5 | ≤ 0.03 µg/kg | ≤ 10 µg/kg each | ≤ 30 µg/kg | 0.2 µm ≤ 20 · 0.3 µm ≤ 15 · 0.5 µm ≤ 3 pcs/mL | tank truck · 200 L · 4 L · 500 mL |
| G3 / UPS | 49.0 ± 0.2 % | ≤ 10 | ≤ 1 µg/kg | Cl ≤ 200 · PO₄ ≤ 100 · NO₃ ≤ 100 · SO₄ ≤ 200 µg/kg | ≤ 50 µg/kg | 0.5 µm ≤ 5 pcs/mL | tonne drum · 200 L |
| G2 / UP | 49.0 ± 0.5 % | ≤ 10 | ≤ 10 µg/kg | Cl ≤ 5,000 · PO₄ ≤ 3,000 · NO₃ ≤ 1,000 · SO₄ ≤ 5,000 µg/kg | ≤ 100 µg/kg | — | tonne drum |
| GR reagent优级纯 | 49.0 ± 0.5 % | — | Fe ≤ 0.00005 % · heavy metals (as Pb) ≤ 0.0001 % | Cl ≤ 0.005 % · PO₄ ≤ 0.0001 % · SO₃/SO₄ ≤ 0.001 % | fluosilicate ≤ 0.02 % | residue on ignition ≤ 0.001 % | 500 mL · 4 L · tonne drum · tank truck |
Wet electronic chemicals · the rest of the producer's book.
| # | Product | Nameplate | Use | Route |
|---|---|---|---|---|
| 1 | Isopropyl alcohol · IPA 异丙醇 | 12,000 t/a | cleaning · drying | purification |
| 2 | PGMEA 丙二醇甲醚醋酸酯 | 12,000 t/a | dilution · cleaning | purification |
| 3 | PGME 丙二醇甲醚 | 12,000 t/a | dilution · cleaning | purification |
| 4 | Ethyl lactate · EL 乳酸乙酯 | 1,000 t/a | solvent | — |
| 5 | n-Butyl acetate · nBA 乙酸正丁酯 | 1,000 t/a | negative-resist developer | purification |
| 6 | Ethylene glycol 乙二醇 | 1,000 t/a | coolant | repack |
| 7 | HMDS 六甲基二硅氮烷 | 10,000 t/a | adhesion promoter | repack |
| 8 | Anhydrous ethanol 无水乙醇 | 5,000 t/a | cleaning | repack |
| 9 | Stripping solution 剥离液 | 20,000 t/a | photoresist stripping | blending |
| 10 | EBR-7030 thinner 光刻胶稀释剂 | 9,000 t/a | edge-bead removal · dilution | blending |
| 11 | MIBC EUV thinner / cleaner | 1,000 t/a | EUV resist dilution · cleaning | JW Korea line |
| 12 | EEP | 1,000 t/a | resist thinner | JW Korea line |
| 13 | TSV backside cleaner · TSV adhesive remover | 1,000 t/a each | advanced packaging | JW Korea line |
Published specifications
| Product | Grade | Purity | Metals | Particles >0.5 µm |
|---|---|---|---|---|
| IPA | G4 / G5 | ≥ 99.999 % | ≤ 0.1 / ≤ 0.01 ppb | ≤ 5 pcs/mL |
| PGME | G3 / G4 | ≥ 99.90 % | ≤ 1.0 / ≤ 0.1 ppb | ≤ 100 / ≤ 5 pcs/mL |
| PGMEA | G3 / G4 | ≥ 99.90 % | ≤ 1.0 / ≤ 0.1 ppb | ≤ 100 / ≤ 5 pcs/mL |
| EBR-7030 | G4 | PGME 69.5–70.5 % · PGMEA 29.5–30.5 % | ≤ 0.1 ppb | >0.2 µm ≤ 10 pcs/mL · H₂O ≤ 100 ppm · acidity ≤ 20 ppm |
Also in the book · on request
Electronic materials: N-(2-hydroxyethyl)-2-pyrrolidone (HEP), 1,4-dioxane, D-tartaric acid, HEDP, methanol. Photoresist solvents: ethyl 3-ethoxypropionate, 3-methoxybutyl acetate, diglyme, bis(2-butoxyethyl) ether, HPMA, benzyl methacrylate. OLED: ethanolamine, stripper, thinner. IC: TMAH, acetone.
Direct supply, SDS in the producer’s name. We quote the lot, not the brochure.
Eleven industrial lines; producer GHS safety data sheets are on file for ten of them, NPG per supplier confirmation. No purity figure is printed here by design: the grade specification and COA are issued against your enquiry, so the number you qualify is the number you receive.
Dimethyl sulfoxide · DMSO二甲基亚砜 · CAS 67-68-5
Pharma and API synthesis, polymer and fibre processing, electronics cleaning, agro formulation.
N,N-Dimethylformamide · DMF二甲基甲酰胺 · CAS 68-12-2
PU synthetic leather, acrylic and spandex spinning, pharma intermediates, coatings.
Tetrahydrofuran · THF四氢呋喃 · CAS 109-99-9
PTMEG, PVC adhesives and cements, pharma synthesis, reaction solvent.
Acetonitrile · ACN乙腈 · CAS 75-05-8
HPLC and pharma purification, DNA synthesis, extraction, agrochemical intermediates.
Maleic anhydride · MA顺丁烯二酸酐 · CAS 108-31-6
Unsaturated polyester and alkyd resins, lubricant additives, paper sizing, food acidulant intermediate.
Neopentyl glycol · NPG新戊二醇 · CAS 126-30-7
Powder-coating polyesters, UPR, synthetic lubricants, plasticisers.
Monoethylene glycol · MEG乙二醇 · CAS 107-21-1
Coolant and antifreeze, polyester resin and fibre, hydrate inhibition.
Propylene glycol · PG丙二醇 · CAS 57-55-6
UPR, heat-transfer fluids, humectant and carrier in industrial formulations.
n-Butanol正丁醇 · CAS 71-36-3
Coatings and ink solvent, butyl acetate and acrylate feedstock, plasticisers.
IPA · industrial异丙醇 · CAS 67-63-0
General cleaning, coatings, inks, pharma process solvent. Electronic grades: page 07.
PGMEA · industrialCAS 108-65-6
Coatings, inks and cleaning solvent. Electronic grades: page 07.
Also available
Crude NMP for recovery and industrial users. Other solvents and intermediates matched on request against a written specification.
Three PU families, one container, tailor-made grades.
Oilfield & water-treatment additives producer山东 · 油田与水处理助剂生产商
Casting prepolymers, flexible-foam systems, binders and poured sports surfaces, polyether polyols and modified MDI — grades adjusted for hardness, NCO % and cure profile to your machine and mould. Samples and trial orders through the Malaysia desk.
- Packing: 20 kg or 200 kg drums (prepolymers); matched two-component sets (foam); one-component moisture-cure (binders)
- Storage: cool and dry; reseal under dry nitrogen after opening; 6-month shelf life unopened
- Paper: TDS, SDS, COA; SGS test reports and REACH SVHC statements for tenders
Selection guide选型指南
| Polyether / TDI | Dynamic-stress parts: high resilience, low-temperature performance, water resistance; lower viscosity and specific gravity. |
| Polyester / TDI | Superior abrasion, tear, oil and solvent resistance. |
| PTMG / TDI | 82 A–75 D span; the highest tear strengths in the range (to 185 kN/m). |
| MDI systems | Lower odour than TDI; better hydrolysis resistance; higher resilience; 1,4-BD-cured. |
| Polycaprolactone | Best cut, tear, load-bearing and abrasion performance with better hydrolysis resistance than polyesters. |
| Polyether polyols | Foam and elastomer systems. Coatings-grade polyester and acrylic polyols are not in this line — ask before assuming fit. |
Typical values in the following pages are for selection only and are not a sales specification. TDI systems are MOCA-cured; colour by pigment.
Casting PU prepolymers · rollers, wheels, sieves, seals, soles and moulds.
| System | Codes | NCO % | Hardness | Tensile | Tear | Cure | Notes |
|---|---|---|---|---|---|---|---|
| Polyester / TDI | D3221 · D3260 · D3130 · D3140 · D3143 · D3150 · D3170 | 2.1–7.0 | 72 A – 62 D | 39–58 MPa | 56–152 kN/m | MOCA | Abrasion loss 38–56 mm³; elongation 410–770 % |
| Polyether / TDI | D1155 · D1160 · D1230 · D1250 · D1262 | 3.0–6.2 | 70–94 A | 7–35 MPa | 34–78 kN/m | MOCA | Rebound 24–50 %; high resilience grades |
| PTMG / TDI | D2130 · D2135 · D2142 · D2162 · D2170 · D2186 · D2196 | 3.0–9.6 | 82 A – 75 D | 24–54 MPa | 55–185 kN/m | MOCA | Highest tear in the range (D2186) |
| Polycaprolactone | D4136 · D4336 · D4160 · D4190 · D4590 | 3.3–9.0 | 60 A – 75 D | 28–60 MPa | 36–180 kN/m | MOCA · BDO (D4590) | Best cut/load-bearing; hydrolysis-resistant |
| MDI systems | D3565 · D3575 · D3590 (polyester) · D2560 · D2575 · D2590 (PTMG) | 6.0–9.0 | 85–95 A | 43–55 MPa | 75–132 kN/m | 1,4-BD · 48 h at 110 °C | Low odour; rebound 35–64 %; abrasion 32–44 mm³ |
| Quasi-MDI | DY2516-A/B/C (PTMG) · DY3516-A/B/C (polyester) | — | 55–95 A by ratio | — | — | one B component | Hardness set by A : B ratio |
| PU mould glue | DM1340/1360 · DM1250/1260 · DM1260–1290/1295 | — | 40–90 A | 5–12 MPa | 25–40 kN/m | A : B 1 : 0.6 → 0.7 : 1 · 25–40 °C | Transparent; shoe and concrete moulds; substitutes silicone for cultured stone |
| Solvent-resistant roller | D3242 + D3243-C | — | 28–60 A | 3–20 MPa | 10–25 kN/m | 16 h at 100 °C | Hardness set by plasticiser 0–60 phr; printing rollers, doctor blades |
| Skate wheel | DH1365-B · DH1387-A · DH1380-C | — | 82 A | 14 MPa | 55 kN/m | B : A : C = 100 : 50 : 10 | Transparent, anti-yellowing; casting machine recommended |
| Shoe upper | DX1622-B · DX3580-A · DX3580-C | — | 60–85 A | — | — | — | Full data sheet on request |
Two-component moulded foam systems for OEM lines.
Automotive seat · DHRDHR-1200A/B · DHR-2200A/B
HR foam for car, motorcycle and train seats. Free-rise density 35–40 kg/m³; flame-retardant options.
Air-filter foam · DLQDLQ-A · DLQ-B
Engines, gensets, machinery. 300–400 kg/m³.
Integral skin · DZJDZJ-A/B
Armrests, steering wheels — skin and core in one shot, 75 ± 5 Shore A.
Mattress & sofa · DHR-1001DHR-1001A/B
Moulded HR foam, 45–50 kg/m³.
Memory foam · DSRDSR-A · DSR-B
Pillows, earplugs, mattresses. 50–60 kg/m³.
Sports systems7526 · DHX · DMT · DAZ
Boxing gloves (Polyol 7526 / Iso 7526), knee pads (DHX-A/B, DMT-A/B), bicycle saddles (DAZ-A/B).
Modified MDI · DGDG5411 · DG5412 · DG5413 · DG1521 · DG5082
Isocyanates for HR, memory, MPUE and integral-skin foam systems.
Other foam applications
Travel pillows · earplugs · armrests · airport seating · toy balls · insoles · cushion and filling blocks · sound insulation · door and window seals.
Buy as matched sets. Every foam system ships as its own A + B pair, index-matched by the producer’s laboratory to your density and demould targets. Send the mould, cycle time and target density; the factory returns a set and a run sheet.
One-component moisture-cure binders and complete poured sport surfaces.
| Binder | Codes | Use |
|---|---|---|
| Rubber-granule moulding · DN | DN1270 · DN1510 · DN1670 · DN1610 · DN1610-T | Gym tiles, playground mats; dosage (6–10) : 100 |
| Cork crumb · DNR | DNR1675 · DNR1260 · DNR1660 · DNR1516 | Stoppers, cork board, handicraft |
| Wet-pour safety surfacing · DN…CW+ | DN1668CW+ · DN1870CW+ · DN1680CW+ · DN1780CW+ (aliphatic) | Aromatic and non-yellowing aliphatic grades |
| Stone-bonding · DNT | DNT-01 | Permeable cobblestone paths, pool surrounds |
| Rebonded foam · DNS | DNS1518 · DNS1518H · DNS1670 | Scrap-foam blocks and underlay |
| Laminating · DJ | DJ1315-B · DJ1360-A | Solvent-free flexible packaging |
PU running-track systems塑胶跑道 · IAAF-certified build-ups†
Water-permeable · sandwich · full-PU · micro-foam. Supplied as full material sets with the run sheet.
Silicon-PU sports courts硅PU球场
UV-stable basketball, tennis and badminton systems: PU · SBR + PU · SBR + EPDM + PU.
Test paper for tenders
SGS-tested for heavy metals, formaldehyde, TDI / SCCP / MOCA; REACH SVHC 211 statement. Producer track references†: Singapore 2017 · Xi’an 2019 · Lahore 2019 · Nasik 2019.
Drilling-fluid additives · seven families, one Shandong producer.
Water-based and oil-based mud additives from an oilfield and refinery additives producer in Shandong. Product manual rev. 2024-03; full data sheets on request.
I · Filtration reducers降滤失剂
DSP-1 · DSP-2 copolymer · PAN-Trol low-viscosity copolymer · PAN-Vis HT viscosifier / filtration reducer · SMP · SMP-III sulfomethylated phenolic resin · SPNH lignite resin · LYS and SHR-1 (HT) modified starch · DACP alkyl cellulose polysaccharide.
II · Shale inhibitors页岩抑制剂
NP-1 nano-polyester · NS-1 nano-SiO₂ · FF-I high-purity sulfonated asphalt · FF-III emulsified asphalt · AP-1 polyamine inhibitor · Polyol · DLA-1 aluminium-based inhibitor.
III · Lubricants润滑剂
HEP-1 EP lubricant for high-density mud · EP-202 EP lubricant · EP-204 oil-base lubricant · GR solid lubricant.
IV · Thinners稀释剂
SF silicon-fluorine thinner · DLST CF chromium-free lignosulfonate thinner.
V · Lost-circulation materials堵漏材料
SDF3 compounded LCM · GWS-1 delayed-expansion LCM · HFD-1 rapid-filtrating high-strength LCM.
VI · OBM additives油基钻井液添加剂
OME-1 primary emulsifier · OME-2 secondary emulsifier · OFC OBM filtration reducer · OMP-1 nano-polymer sealing additive · OMP-2 expanded-graphite plugging agent.
VII · Other series其他系列
ZH-2 corrosion inhibitor · JM-1 bactericide · SR301 pipe-freeing agent · polyether and PD-100 organosilicon defoamers · KT quick-speed penetrant.
How to qualify
Sample ships with the producer’s data sheet; your mud engineer runs it on your base fluid; deviations go back to the producer’s laboratory (CNAS-accredited†). Supplies CNOOC and Sinopec operations†.
From the wellhead to the water outfall · the XY series.
| Family | Codes | What it does |
|---|---|---|
| Crude-oil demulsifiers | XY-MP-1 → MP-7 · XY-C02 · C04 · C06 · C07 · C07-1 · CJ102 · XY-PR33 · P26 · CJ24 | Resin-type polyoxypropylene/polyoxyethylene ether demulsifiers; oil-soluble, broad-spectrum, heavy-crude dehydration; density 0.90–1.00, flash point > 61 °C (MP series) |
| Paraffin inhibitors | XY-60A (dispersant) · XY-57A (oil-soluble) | Wax deposition control in flowlines and tubing |
| Viscosity reducers | XY-MJN-1 (heavy oil) · XY-26B (water-soluble) | Heavy-crude lifting and pipeline transport |
| Water clarifiers | XY-MQ-1 · MQ02 · MQ03 · TA02 | Produced-water oil removal before reinjection or discharge |
| Biocide · corrosion inhibitor · desulfuriser | XY-MS-1 · XY-MHS-1 · XY-MTL-1 | Microbial control, sewage-system corrosion inhibition, sulfur removal |
| Asphalt dispersants | XY-ASD-1 · ASD-2 · XY-16 · XY-23B | Asphaltene stabilisation in crude and refinery streams |
| Fuel additives | Cetane improver · diesel lubricity improver | Refinery finishing additives |
| Concrete admixtures | Mortar plasticiser · setting agent · solid PCE water reducer (water-reducing and slump-retaining types) | Dry-mix mortar and ready-mix concrete |
Quoted on request · declared supply capability
Refinery and petrochemical consumables the producer has declared capability for (list rev. 031224): antioxidants 1010 / 168 / 1076 · zinc and calcium stearate · sodium benzoate · antiblock silica · white oil and petroleum jelly · potassium carbonate and boric acid (Benfield) · ferric chloride · hydrated lime · phosphoric acid · ethyl chloride · antifoam · sodium nitrite · zinc oxide · polyacrylic acid (PAA) · gas-treating amines (MEA / MDEA / DGA) · DMDS and ethyl mercaptan.
Malaysian-side processing
Blending, dilution and drumming under your specification and QC are available through a PETRONAS-licensed partner blender in Selangor — for products that need a Malaysian label or a local repack.
Industrial water treatment · a ten-product programme, one producer.
Membrane, cooling, biological, oil–water and discharge chemistry from the Shandong polyether producer behind pages 13–14. Codes and chemistries as published in the producer’s 2026 portfolio; performance statements are the producer’s own (†) until a TDS and a jar test on your water replace them.
| # | Product · series | Chemistry | Where it goes | What the producer claims† |
|---|---|---|---|---|
| 01 | Membrane antiscalant & dispersant膜系统阻垢分散剂 · XY-RO 300 / 300C | Polycarboxylic + organophosphonic acid complex | RO / NF units, ultrapure-water stations, ZLD brines, desalination | Controls CaCO₃, CaSO₄ and silica scale; compatible with major polyamide elements; longer CIP intervals |
| 02 | Polyether defoamer聚醚环保消泡剂 · XY-DF 100 / 200 | Non-silicone polyether block-copolymer emulsion | Aeration basins, dyeing effluent, food and slaughterhouse wastewater, paper, MBR | Silicone-free, so no irreversible membrane blinding; shear-stable; works pH 3–12 |
| 03 | Demulsifier & deoiler高效破乳剂与除油剂 · XY-DM 500 · XY-DO 400 | Phenolic-resin polyether block demulsifier; water-soluble reverse demulsifier | POME oil-recovery systems, cutting-fluid emulsions, petrochemical oily water ahead of DAF | Sharp oil–water interface; higher residual-oil recovery; lower COD and emulsified-oil load. See also the POME line, page 16 |
| 04 | Cooling-water corrosion & scale inhibitor循环水阻垢缓蚀剂 · XY-CI 800 | Phosphonocarboxylic acid + organic polymer, zinc-free | Open and closed cooling towers, heat exchangers, utility loops | Protective film on carbon steel, copper and stainless; pitting control; high cycles of concentration |
| 05 | Biocide & algaecide工业杀菌灭藻剂 · XY-BIO 600 / 700 | Isothiazolinone (CMIT/MIT) blend; quaternary-ammonium non-oxidising biocide | Cooling basins, slime stripping in condenser lines, tanks ahead of biological stages | Broad-spectrum control incl. sulfate-reducing bacteria, fungi and algae; non-oxidising, no attack on plant materials |
| 06 | Heavy-metal chelant & flocculation enhancer重金属捕集与絮凝增强助剂 · XY-TC 900 | Polyether-grafted macromolecular organosulfur chelating coagulant | Electroplating and electronics effluent, coagulation–precipitation tanks | Binds dissolved Cu, Ni, Cr and Zn even with EDTA present; dense, fast-settling flocs |
| 07 | H₂S scavenger / desulfuriser脱硫剂（水相 / 气相）· XY-SCAV 750 | Triazine derivatives; non-triazine water-soluble amine complexes | Biogas, anaerobic-digester off-gas, high-sulfur wastewater, sour oily water | Irreversible conversion of H₂S and mercaptans to water-soluble dithiazines; fast kinetics; non-corrosive |
| 08 | Water clarifier · de-turbidity / deoiler高效清水剂 · XY-CLR 450 | Cationic amphiphilic polyether polymer coagulant | Secondary-clarifier polishing, post-DAF oily water, high-turbidity industrial water | Charge neutralisation plus bridging; removes trace solids and colloidal oil; turbidity below 5 NTU |
| 09 | Iron-ion stabiliser / chelant铁离子稳定剂 · XY-FE 250 | Multifunctional organic hydroxy-carboxylic complexing agent | Acid-pickling wastewater, pipeline descaling, oilfield acidising, RO feed pretreatment | Holds ferrous iron from oxidising and Fe(OH)₃ from precipitating across pH 1–9; protects resins and membranes |
| 10 | Emulsion inverter for dyeing auxiliaries印染乳液相转剂 · XY-TR 650 | Specialty polyether surfactant; phase-inversion catalyst | Textile printing and dyeing wastewater, emulsion-polymerisation residues, viscous dye emulsions | Shifts interfacial tension to force W/O → O/W inversion or rapid demulsification; breaks binder emulsions for coagulation |
POME demulsifier · our own capital in the plant.
A demulsifier for palm-oil mill effluent that releases residual oil from the emulsion so the mill recovers it instead of losing it to the pond. FZ holds equity in the plant that makes it — which is why the formulation can be tuned to a specific mill’s effluent, and why we say “stake” rather than “manufacturer”.
- Residual-oil recovery from sludge and effluent streams — the recovered oil pays for the chemical.
- Dosage set on your sample. Jar test on the mill’s own effluent before any commercial quantity.
- Formulation adjustable — because the plant is partly ours to direct, not a catalogue we resell.
- Supplied through the Malaysia desk, with Malaysian-side drumming available via the PETRONAS-licensed partner blender. The producer’s own POME demulsifier series is on page 15.
How a trial runs试用流程
Send an effluent sample from the point you want to treat, with your current oil-loss figure.
Jar test and dosage curve returned with the recovered-oil result, in writing.
Mill trial on one line, measured against your own recovery numbers.
Supply agreement priced against recovered oil, not chemical volume alone.
Product and dosage sheets issued per mill after the jar test. No performance figure is printed here because the right one is yours.
Five herbicide technicals · one named producer, full TDS + SDS.
Technical-grade materials for Malaysian formulation partners. Producer: a Shandong manufacturer (named on quotation). Supply basis CIF Port Klang, FCL. TC for formulation processing only — registration with the Pesticides Board is the formulator’s; we supply the dossier inputs.
| Technical | Content (min.) | CAS | Class · mode | WHO class | Oral LD50 (rat) | Typical formulation | Packing | Where it is used |
|---|---|---|---|---|---|---|---|---|
| Clethodim TC | 91.2 % | 99129-21-2 | Cyclohexenone (DIM) · systemic post-emergence | III | 1,360–1,630 mg/kg | 240 g/L EC | 200 L drum | Grass weeds in dicot crops |
| Oxyfluorfen TC | 95.0 % | 42874-03-3 | Diphenyl-ether · contact, pre- and post-emergence | U | > 5,000 mg/kg | 24 % EC | 25 kg bag | Tree crops, rice, onions, ornamentals |
| Metolachlor TC | 95.0 % | 51218-45-2 | Chloroacetamide · systemic pre-emergence | III | 1,710 mg/kg | EC / custom | 200 L drum | Soybean, maize, row crops |
| Atrazine TC | 92 % | 1912-24-9 | Triazine · systemic, root-absorbed | U | 672 mg/kg | 38 % SC · 500 g/L SC · 80 % WP · 90 % WDG | 25 kg bag | Maize, sorghum, sugar cane, pineapple |
| 2,4-D TC | 96 % | 94-75-7 | Phenoxy · systemic post-emergence | — | 1,160 mg/kg | Amine salts · esters · custom | 25 kg bag | Broad-leaved weed standard |
A registration route, and a surfactant class on a substitution curve.
Glyphosate & adjacencies · the TC-to-SL route草甘膦 · 中国原药 + 马来西亚制剂
Chinese technical + Malaysian formulation partner. We work inside the producer network that already holds Malaysian registrations or manufacturing footprint, and we know the 5-year renewal cycle, the TC-source dependency and the 12–18-month approval timelines that decide what actually ships.
Palm-oil and rubber plantations are the demand base. Insecticide and fungicide lines (Noposion, Hailir, Yangnong, Lier and others with MY registration) on request. Producer names are public-record registrations, not FZ agencies.
α-FES / ESES · bio-based anionic surfactantα-脂肪酸乙酯磺酸盐
Plant-oil-derived fatty acid ethyl ester sulfonates: biodegradable, sulfate-free, phosphorus-free — the class displacing LAS and AES in detergents, personal care and industrial cleaning.
Performance attributes claimed by the class: hard-water tolerance, high-alkali and electrolyte stability, adjustable foam profile. Grades, actives and COA per enquiry.
Metam-sodium (42 % aqueous and 30–35 % standard) is sourced on request from the Shandong, Jiangsu, Liaoning, Yunnan and Sichuan production areas. A global supply-demand map for the category is available from the desk.
Sweeteners & hydrocolloids · direct supply from a certified producer.
Erythritol赤藓糖醇
Zero-calorie, non-cariogenic, high solubility, GMO-free. Beverages, bakery, confectionery, tabletop.
Allulose阿洛酮糖
Rare sugar, ~70 % sweetness of sucrose, 0.4 kcal/g, browns like sugar. Approved in USA, Japan, Canada, Australia and South Korea†; EU novel-food status to be confirmed.
Stevia Reb M莱鲍迪苷 M
~350× sucrose, no bitter aftertaste. Soft drinks, reduced-sugar foods, health products.
D-Tagatose塔格糖
~92 % sweetness, prebiotic, low glycaemic. Functional foods and diabetic-friendly products.
Mannitol · mannose甘露醇 · 甘露糖
50–70 % sweetness, low glycaemic index; pharma excipient and functional-food uses.
Rubusoside · glucosylglycerol · AA-2G甜茶苷 · 甘油葡糖苷 · 抗坏血酸葡糖苷
High-intensity sweetener, humectant and stable vitamin-C derivative for food, supplement and cosmetic formulation.
Xanthan gum黄原胶
1 % solution viscosity 1,200–1,700 cps · shearing ratio ≥ 6.5 · starch- and guar-free. Food, personal care, drilling fluids, glazes.
Co-crystallised blends
Erythritol or allulose co-crystallised with stevia, monk fruit or sucralose at 1× / 2× / 4× sucrose sweetness, or to your target.
Producer certifications on file: ISO 9001 / 14001 / 22000, BRC, SMETA, Halal, Kosher; organic (NOP, EOS, JAS) on erythritol. Certificates are in the producer’s name and travel with the COA. Grades and specifications per enquiry.
What travels with every lot, and what arrives before you commit.
With every shipment随货文件
- Certificate of analysis per batch, in the manufacturer’s name, line by line against the specification
- Technical data sheet and GHS safety data sheet (English; Chinese original on request)
- Specification sheet with file number, revision and effective date where the producer issues one
- Third-party reports where they exist — SGS halogen / RoHS on NMP; SGS heavy-metal and SVHC tests on PU systems
- REACH SVHC statement where applicable
- Form E certificate of origin under ACFTA, commercial invoice, packing list, bill of lading
Before you commit: the paper file先看纸，再看样
For one named grade we send a file you can reject in twenty minutes:
- Specification matrix against your current material — including the rows that do not favour us
- Batch COA, TDS and SDS in the manufacturer’s name
- Landed basis with a validity date
- Qualification path, who does what, and honest clocks
- One accountable name at the desk
Paper
Reject on the file if it does not fit.
Sample
Matched to the grade you would order.
Plant trial
Your line, your QC, incumbent untouched.
Purchase order
Qualification-size first; scale on lot data.
CIF your port. Clocks we commit to, not averages we hope for.
Commercial terms商务条款
- Incoterms: CIF Port Klang · Pasir Gudang · Penang; other SEA ports on request; FOB China available
- Settlement: USD, MYR or RMB · LC or TT
- Duty: China → ASEAN under ACFTA with Form E where the tariff line qualifies
- Stock: none held in Malaysia; consignment terms follow once a lot has landed
- Validity: every quotation carries a date
Packing options包装
- Electronic solvents: 500 mL · 4 L / gallon · 20 L pail · 200 L drum · IBC · ISO tank
- HF: 500 mL · 4 L · 200 L · tonne drum · tank truck (DG-rated)
- Industrial solvents: 200 L drum · IBC · ISO tank
- PU systems: 20 / 200 kg drums; matched A + B sets
- Technicals & ingredients: 25 kg bags · 200 L drums
Malaysian-side services马来西亚端服务
- Blending, dilution and drumming under your specification and QC through a PETRONAS-licensed partner blender in Selangor
- Consolidation: several producers, one container, one document set
- Tender and audit packs assembled before the deadline
- Working languages: English · 中文 · Bahasa Malaysia
Don’t take the catalogue’s word for it. Run the checks.
Look us up
SSM 202501022195 (1623608-D) — FZ New Material Sdn Bhd, Companies Commission of Malaysia.
Ask for paper
Specimen COA, TDS and SDS for your product — before any commitment. Check the producer’s name on them.
See the plant
A live video call from the factory floor, arranged on request.
Test in your lab
Samples first, always — matched to the grade you would actually order.
Start small
A qualification-size first order. Scale only when our lot data has earned it.
NEW
MATERIAL
Level 22-3A, Mitraland Tower, Kota Damansara,
Petaling Jaya, 47810 Selangor, MALAYSIA